A little Toxic help

[dw800seeker]

Okay, now the BW and NM are working pretty well together. I need some assistance on where the Toxic is going to fit in and how to drill it.

In my leagues the oil generally starts in a med/med light house pattern. Depending on what the opponents are doing my initial shot usually holds up into the beginning of the 3rd game at least. Initial shot can vary. But, it is generally between center arrow (20) and 6th arrow (30) with feet aiming at 10-12 board.

Question is what do you recommend for drilling, and if you are so inclined when to go from ball to ball when you bring 3 balls plus 10 pin ball to the show?

Thank you for any assistance.:cool: :cool:

[grayfin68]

I have a TOXIC that works great in similar conditions to your league. My league is the second league of the night and I usually throw with my PAIN to start and when it starts hooking too early, I switch to the TOXIC.

That ball will roll a little longer and hook a little sharper on the back end.

Here's the link to the drilling instructions for the TOXIC:

http://hammerbowling.com/tech_info/detail.php?drilling=Drilling%20Instruction%201

I have the High RG - Medium Layout. That works well for me. I throw about 17.5 mph, left foot starting around 32, throw at 10. The TOXIC kind of goes straight through the heads and hooks strong on the back with that layout and my style.

[Nascar4292]

me i would recommend the way that i have mine drilled which is the same way everyone else in my house has there pain and doom drilled........either the pin above or below the fingers 12 oclock. cg kicked out with a weight hole across from the cg. I love this drilling and it is my pro shops favorite drilling as well.....great on medium to light oil. see my next tread to see what i bowled today in the scratch tourney with it lets just say i averaged 217 and i didnt have to move at all with this ball all day.